Selecting output terminal type

Introduction

This table defines the type of output terminal that the applications will choose automatically, according to the following parameters:

• Type of conductor
• Rating current
• Rating voltage

Table fields (Selecting output terminal type)

• Conductor type: enter the conductor type according to the following code:
  1 = Flat wire
  2 = Foil
  3 = Wire
  4 = Multi wire
  In case the output type is valid for more than one conductor, enter 1 code in sequence.
  Esempio: Example: If the output type is valid for both wire and flat wire enter: 13 .
• Max current A: maximum rated current for which that type of output can be used.
• Max voltage V: maximum rated voltage for which that type of output can be used.
• Selecting output terminal type: output terminal type code:
  1 = Terminal blocks in lists
  2 = minal blocks on rail
  3 = Lugs
  4 = External bars (used when the winding is in flat wire, but the current does not allow for the use of lugs). They are bars fixed to a plate or an insulator to which the flat wire, coming off the coil, is welded.
  5 = Bars inside the foil winding.
• Description: the description of the type of output is inserted in the table for clarity.